StairPartsUSA.com features only the finest quality handrail. Unlike many competitors, our stair railings does not have finger or butt joints. No one likes ugly joints on their handrail. Usually handrail joints are less obvious prior to staining the handrail, but they really stand out once the handrail is stained. If you are looking for quality stair rail at a good price, click on the photos below.
6010 Handrail: American Cherry, Brazilian Cherry, Hickory, Maple, Red Oak, White Oak, Santos Mahogany, and Sapele Mahogany Handrail. Other woods are available by request.
Handrails or stair railings are parallel lengths of wood on stairways that are used as grasping points for ascending or descending a staircase. They are supported and anchored by vertical posts, called newel posts, or attached to a wall by use of handrail brackets.
StairPartsUSA.com features only the finest quality handrail. Our 6010 and 6115 standard handrail is crafted without ugly joints. Unlike our competitor's handrails, our staircase rails have no unsightly finger joints or butt joints. We offer most commonly requested wood species including Red Oak, White Oak, Brazilian Cherry, American Cherry, Maple, Hickory, Alder, Santos Mahogany, Sapele Mahogany and Black Walnut. Why settle for lesser quality, jointed handrails when you can have the best from StairPartsUSA.com? Are you interested in a wood type not listed on our site? We will do our best to accommodate you, just give us a call at 1 800-403-1480.
Unlike many producers, our handrail remains in the rack for 16 hours or longer. Once the handrail "blank" is removed from the rack, it is sent through a molder to create the handrail. This method eliminates unsightly finger joints and butt joints. Once the handrail is removed from the molder, it is again inspected, hand-sanded and boxed for shipment. Our Amish crafted handrail is inspected at every step along the path to shipment. We also offer bending and plowed handrail. Call us if you have any questions about our bending handrail.
Whether you are doing a post-to-post or over-the-post stair rail system, we offer a broad selection of post-to-post newels, box newels, and fittings to meet your needs. Listed below is our offering of fittings to fit our 6115 profile and 6010 profile handrail.
We offer quality handrail in the following profiles:
Plowed handrail is a process whereby a small section is cut out from the bottom of the handrail so that square balusters can fit into the bottom of the handrail. Fillet is then put into the sections between the balusters and glued into place to help hold the balusters securely.
Bending handrail is used on curved stairways. The process of making bending handrail involves vertically slicing handrail into sections. These sections are glued and clamped into a mold and bent to fit the stairway. Once the glue has completely dried, the handrail will retain the "bent" shape. Bending handrail is generally not recommended to the do-it-yourselfer. The process of installing it is more complex than the average do-it-yourselfer can handle. Many do-it-yourselfers will install part of the stairway themselves and hire a contractor to do the bending handrail.
If you are looking for a more spectacular look in a larger stairway, consider using box newels. We offer Box Newels, in both Contractor and Amish Crafted grades.